geron.bk : geron-3.fb4 Page 61 Friday, April 24, 1998 5:30 PM
Make sure that the printer is configured correctly for the
•
PC Workstation and for the application.
a Ensure the PC Workstation's port has been correctly configured
using Setup.
b Make sure the printer is correctly set up in your operating
system's configuration.
c Ensure the application program's "print" menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
Check that the PC Workstation's port is working properly by running
•
another peripheral connected to the port.
If you receive an error message, refer to the printer's manual for help.
•
If the Floppy Disk Drive Does Not Work
Check that you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the correct density.
•
Check that the floppy disk drive is correctly configured in the Setup
•
program (Advanced > Flexible Disk Drive).
Check that the floppy disk drive is not disabled in the Setup program
•
(Advanced > Flexible Disk Drive).
Check that the Flexible Disks item and the Write on Flexible Disks
•
item are not set to locked in the Setup program (Security > Hard-
ware Protection).
Clean the floppy disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
•
3 Troubleshooting Your HP Kayak PC Workstation
If Your PC Workstation Has a Hardware Problem
English
61