geron.bk : geron-2.fb4 Page 29 Friday, April 24, 1998 5:30 PM
Video Adapter
Accessories Available
from Other Sources
5 Slide the memory module into the slot at 90° to the system board
(with the cutouts furthest away from the processor).
Slide the memory module into the
o
slot at 90
to the system board
6 Firmly press the memory module completely into the connector
until the retaining clips click into position.
7 Repeat this procedure for each additional memory module you want
to install.
8 Install any other accessories if necessary, then replace all units and
reconnect all cables and power cords. Replace the cover (refer to
page 24).
9 Check the HP Summary Screen to verify the new configuration
(refer to "The HP Summary Screen and Setup Program" on page 90).
Additional accessories, including a video MPEG module, are available
for your video adapter. However, these accessories cannot be ordered
from HP. Contact your dealer for more details about these accessories.
2 How to Install Accessories In Your HP Kayak PC Workstation
Memory module
cutouts
Push the module until the
retaining clips click into position
Installing Memory
English
29