HP Kayak XA-s02 User Manual page 58

geron.bk : geron-2.fb4 Page 48 Friday, April 24, 1998 5:30 PM
Completing the
Installation of a
Processor
NOTE
2 How to Install Accessories In Your HP Kayak PC Workstation
Installing a Processor
9 Replace the power supply and the HP UltraFlow airflow guide.
1 Verify that the system board bus speed switches are correctly
configured for the processor, as shown below.
If two processors are installed, both must operate at the same bus speed
and processor speed. Refer to the manual supplied with the processor
to verify which bus and processor speeds are supported.
Switch 2 Switch 3 Switch 4
1
UP DOWN UP
UP DOWN UP
UP UP DOWN
UP UP DOWN
UP DOWN UP
UP DOWN UP
UP DOWN DOWN
1. UP=OFF, DOWN=ON.
48 English
Switch 5 Bus Processor
Speed Speed
UP 66 MHz 266 MHz
DOWN 66 MHz 300 MHz
UP 66 MHz 333 MHz
DOWN 100 MHz 350 MHz
UP 100 MHz 400 MHz
DOWN 100 MHz 450 MHz
UP 100 MHz 500 MHz