If The Floppy Disk Drive Does Not Work; If The Hard Disk Drive Does Not Work - HP Kayak XA-s 02xx Troubleshooting Manual

If the Hard Disk Activity
Light Does Not Work
HP Kayak XA-s 02xx PC Workstation - Troubleshooting Your HP Desktop PC Workstation
If Your PC Workstation Has a Hardware Problem

If the Floppy Disk Drive Does Not Work

Check that you are using a formatted diskette and it is inserted
•
correctly.
Check you are using a diskette that is the correct density.
•
Check that the floppy disk drive is correctly configured in the Setup
•
program (Advanced > Flexible Disk Drive).
Check that the floppy disk drive is not disabled in the Setup program
•
(Advanced > Flexible Disk Drive).
Check that the Flexible Disks item and the Write on Flexible Disks
•
item are not set to locked in the Setup program (Security > Hard-
ware Protection).
Clean the floppy disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
•

If the Hard Disk Drive Does not Work

Check that the disk power and data cables are correctly connected.
•
For an IDE drive, check the IDE Device's configuration settings in
•
the Setup program (Advanced > IDE Devices).
For an IDE drive, check the Hardware Protection settings in the
•
Setup program (Security > Hardware Protection).
For an IDE drive, check the Boot Device Security settings in the
•
Setup program (Security > Boot Devices Security).
For a SCSI drive, check the SCSI Interface settings in the Setup
•
program (Advanced > External\ Internal 16 SCSI (Symbios) and in
the Configure SCSI Utility).
If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
Check that the control panel connector is firmly attached to the
•
system board.
Check that the disk power and data cables are correctly connected.
•
16 English