geron.bk : geron-2.fb4 Page 35 Friday, April 24, 1998 5:30 PM
9 For a drive in the upper shelf, tighten the four retaining screws on
top of the hard drive's unit.
For a drive in the lower shelf, use the four spare screws from the top
(center) of the hard drive unit, to secure the hard disk drive on
either side.
10 Connect the power and the data cables to the rear of the drives. (The
connectors are shaped to go in one way only.)
Power Cable
2 How to Install Accessories In Your HP Kayak PC Workstation
Use the four spare screws from
the top of the hard drive unit.
Installing Mass Storage Devices
Data Cable
English
35