System Recovery Options; System Recovery From The Windows 7 Start Menu - HP Pro ms218 Maintenance And Service Manual

The number of discs in the recovery disc set depends on your computer model (typically 1–3 DVD
discs). The Recovery Disc Creator program tells you the specific number of blank discs needed to
make the set.
The process takes some time to verify that the information written on the disc is correct. You can quit
the process at any time. The next time you run the program, it resumes where it left off.
To create recovery discs:
1.
2.
3.
4.

System Recovery Options

You should attempt system recovery in the following order:
1.
2.
3.
4.

System recovery from the Windows 7 Start menu

If the computer is working, and Windows 7 is responding, use these steps to perform a system
recovery.
NOTE:
Therefore, ensure you have backed up to a removable disc any data that you want to keep.
1.
2.
3.
4.
5.
6.
Downloaded from www.Manualslib.com
Close all open programs.
Tap the Start button, All Programs, Recovery Manager, and then tap Recovery Disc
Creation. If prompted, tap Yes to allow the program to continue.
Follow the on-screen instructions. Label each disc as you make it (for example, Recovery 1,
Recovery 2).
Store the Recovery discs in a safe place.
Through the hard disk drive, from the Windows 7 Start menu.
Through the hard disk drive, by pressing the
Through recovery discs that you create.
Through recovery discs purchased from HP Support. To purchase recovery discs, go to
http://www.hp.com/support
model.
System Recovery deletes any data or programs that you created or installed after purchase.
Turn off the computer.
Disconnect all peripheral devices from the computer, except the monitor, keyboard, and mouse.
Turn on the computer.
Tap the Start button, All Programs, Recovery Manager, and then tap Recovery Manager. If
prompted, tap Yes to allow the program to continue.
Under I need help immediately, tap System Recovery.
Tap Yes, and then tap Next.
Your computer restarts.
NOTE: If your system does not detect a recovery partition, it will prompt you to insert a
recovery disc.
manuals search engine
F11 key on the keyboard during system startup.
and visit the Software & Driver downloads page for your computer
System Recovery Options 49