Section 4: Operations; Operation Safety; Basic Edge Sander Controls - Grizzly G1140 Owner's Manual

SEctiON 4: OpERAtiONS

Operation Safety

to reduce the risk of
serious injury when using
this machine, read and
understand
manual before beginning
any operations.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
NOTICE
if you have never used this type of machine
or equipment before, We strongly recom-
mend that you read books, trade magazines,
or get formal training before beginning any
projects. Regardless of the content in this
section, Grizzly industrial will not be held
liable for accidents caused by lack of train-
ing.
-24-
this section covers the basic controls used during
routine operation.
paddle Switch: turns the motor ON when flipped
this entire
up; turns motor OFF when pressed down (figure
26).
Switch Disabling Key: disables switch when the
yellow key is removed.
table tilt: to tilt the table, loosen the trunnion
lock handles (figure 27), tilt the work table to the
desired angle, then retighten the lock handles.
it may be necessary to re-adjust the work table
closer to the platen (refer to page 21, Step 13),
aiming for a
and the work table.
basic Edge Sander
controls
paddle switch
figure 26. paddle switch location.
/ " to / " gap between the platen
1 3
8 16
figure 27. trunnion lock handles.
g1140/g1531 6" X 80" edge sander
Key