NOTE: If you choose to use an active proxy, ensure that it forwards all the traffic from the LWC to the
AWS cloud proxy (see Outbound Connectivity Requirements table in
Active Proxy
for the AWS cloud proxy URL and ports). Juniper cloud services blocks all the inbound traffic
coming through any path other than the AWS cloud proxy.
NOTE: If you choose to use an active proxy, ensure that the LWC's external interface IP configuration can
reach the active proxy's URL or IP address.
NOTE: In version 1.0.43 and later releases, the Active Proxy section is collapsed by default if an active
proxy is disabled or not configured. To configure, click Enable/disable to expand the Active Proxy section.
NOTE:
• The subnet of the IP address assigned to the internal network port must be different from the subnet of
the IP address assigned to the external network port. This applies to both DHCP and static configurations.
6. After modifying the fields, click Update to apply the changes and return to the homepage (the JSI Data Collector
page).
If you want to discard your changes, click Cancel.
If the LWC connects to the gateway and DNS successfully, the respective configuration element (internal or external
network section) on the JSI Data Collector homepage shows the connection status as Gateway Connected and DNS
Connected with green tick marks against them.
The JSI Data Collector homepage displays the Connection Status as:
• Juniper Cloud Connected if the external connectivity to the Juniper Cloud is established and the active proxy (if
applicable) settings are correctly configured.
• Cloud Provisioned if the device is connected to Juniper Cloud and has completed the Zero Touch Experience
(ZTE) process. After the Cloud connection status becomes Juniper Cloud Connected, it takes about 10 minutes
for the provision status to become Cloud Provisioned.
The following image displays the JSI Data Collector page when the LWC is connected successfully (version 1.0.43
and later releases).
Configure the Network Ports and
10
Need help?
Do you have a question about the Day One+ LWC and is the answer not in the manual?