Juniper Day One+ LWC Manual page 9

NOTE: If the default DHCP configuration on the LWC is successful, the captive portal shows the LWC's
connection status as connected, and populates the fields in all the configurations sections appropriately.
Click the Refresh icon under the External Network or Internal Network sections to refresh the current
connection states for that section.
The JSI Data Collector page displays configuration sections for the following:
• External Network—Lets you configure external network port that connects the LWC to the Juniper's Cloud.
Supports DHCP and static addressing. The External Network configuration is used to perform device
provisioning.
• Internal Networks—Lets you configure the internal network port that connects the LWC to the Juniper devices on
your network. Supports DHCP and static addressing.
• Active Proxy—Lets you configure the active proxy IP address as well as the port number if your network
infrastructure controls access to the Internet though an active proxy. You need not configure this element if you
are not using an active proxy.
5. Click the Edit button under the element that needs to be updated.
You need to modify the fields in:
• The Internal Network and External Network sections if their connection states indicate that they are
disconnected.
• The Active Proxy section if you are using an active proxy.
9