Juniper Day One+ JSA7800 Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Hardware
  5. JSA7800
  6. Manual
Juniper Day One+ JSA7800 Manual

Juniper Day One+ JSA7800 Manual

Hide thumbs Also See for Day One+ JSA7800:
Table of Contents

Advertisement

Quick Links

Download this manual
Day One+
JSA7800
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 8
Step 3: Keep Going | 17
Step 1: Begin
IN THIS SECTION
Meet the JSA7800 Appliance | 1
Install the JSA7800 | 2
Power On | 7
In this guide, we provide a simple, three-step path, to quickly get you up and running with your new JSA7800. We've
simplified and shortened the installation and configuration steps, and included how-to videos. You'll learn how to install
an AC-powered JSA7800 in a rack, power it up, and configure basic settings.
Meet the JSA7800 Appliance
The JSA7800 provides highly–scalable security information and event management (SIEM) for large, globally distributed
organizations. It consolidates security events collected from the thousands of network devices, endpoints, and applications
distributed throughout your network. Using big data analysis, the JSA7800 distills that information into an actionable list
of offenses, enabling you to shutdown malicious activities before they cause damage.

Advertisement

Table of Contents
loading

Related Manuals for Juniper Day One+ JSA7800

Summary of Contents for Juniper Day One+ JSA7800

  • Page 1 Day One+ JSA7800 IN THIS GUIDE Step 1: Begin | 1 Step 2: Up and Running | 8 Step 3: Keep Going | 17 Step 1: Begin IN THIS SECTION Meet the JSA7800 Appliance | 1 Install the JSA7800 | 2 Power On | 7 In this guide, we provide a simple, three-step path, to quickly get you up and running with your new JSA7800.
  • Page 2 The JSA7800 is a 128-GB, 2-U rack mountable appliance with two 10-Gigabit SFP+ interfaces, four 1-Gigabit Ethernet interfaces, four USB 2.0 ports, and a DB-9 COM port. It comes preinstalled with hot-swappable dual-AC power supplies and 16 hot-swappable hard drives that support RAID. Optionally, you can order a DC-powered JSA7800. See the JSA7800 Hardware Guide for instructions on how to install a DC-powered JSA7800.
  • Page 3 DB9 adapter Rack mount kit which includes: Rail adapters One pair of rack rail assemblies Mounting screws to attach the rails to the chassis M5 screws to attach the rails to the rack What Else Do I Need? Someone to help you secure the appliance to the rack Number 1 Phillips (+) screwdriver Number 3 Phillips (+) screwdriver Tie wrap...
  • Page 4 Callout Component Inner rail Locking tab Middle rail Outer rail Locking tab 3. Install the inner rail extensions. a. Pull the inner rail out of the outer rail until it is fully extended as illustrated. Press the locking tab down to release the inner rail.
  • Page 5 NOTE: Each inner rail of the JSA7800 has a locking tab. The locking tabs secure the chassis when it’s either installed or completely extended from the rack. 4. Install the outer rails: a. Press the locking tabs upward at the rear of the middle rails, and slide the middle rails into the outer rails. b.
  • Page 6 f. Secure the rear of the outer rails to the rack with the M5 screws. 5. Slide the middle rails away from the rear of the outer rails. 6. Position the ball-bearing shuttle at the front of the middle rails. 7.
  • Page 7 9. Press the locking tabs on both sides simultaneously, and slide the chassis into the rear of the rack. 10. Secure the chassis handles to the four-post rack with the mounting screws. Power On Now you’re ready to connect the JSA7800 to a dedicated AC power source. The switch comes with the AC power cord for your geographic location.

  • Page 8: Step 2: Up And Running

    Power button Reset button LEDs Power GLAN2 GLAN1 Alert/Power fail Information 5. Familiarize yourself with the LEDs: State Power Solid green— Indicates that the appliance is receiving power. Hard drive Unused LAN1— Indicates eno1 interface activity when blinking. LAN2— Indicates eno2 interface activity when blinking. Information Red (blinking)—...

  • Page 9: Plug And Play

    Now that the JSA7800 is powered on, let’s do some initial configuration to get it up and running on the network. Plug and Play The JSA7800 ships with factory-default settings that enable plug-and-play operation. These settings load as soon as you power on the switch.
  • Page 10 Configure the JSA7800 When using a laptop or PC to connect to the appliance, you'll need to use a terminal program, such as HyperTerminal to connect to the appliance. Have this information handy before you begin to configure the JSA7800: Hostname IP address Network Mask...
  • Page 11 NOTE: Use the up/down arrow keys on your keyboard to choose an option and press the spacebar to select it. Use the left/right arrow keys on your keyboard to select Next, Back or Cancel, then press Enter. Select an Appliance ID and Tune Your Appliance 1.
  • Page 12 Configure the Date and Time 1. Select the method you want to use to set the date and time. Manual— Allows you to manually input the date and time. Select Next. Server— Allows you to specify your time server. Select Next. 2.
  • Page 13 3. Select your time zone region, and then select Next.
  • Page 14 1. Select one of the Internet protocols, IPv6 or IPv4. Choose an interface configuration mode (not mandatory). You can bond the interfaces during the JSA installation process, or after installation. For more information about interface configuration modes, see [Juniper Secure Analytics Installation Guide and Juniper Secure Analytics Administration Guide].
  • Page 15 Hostname— Type a fully qualified domain name as the system hostname IP Address, Network Mask, Gateway, and Primary DNS Optional— Secondary DNS and Public IP. Email server— E-mail server name. If you don’t have an e-mail server, specify the local host in this field. 5.

  • Page 16: Verify The Settings

    6. Select Next. The New Root Password window displays. 7. Enter your new root password. Re-enter your new root password to confirm, and select Finish. A series of messages are displayed as JSA continues with the installation. Based on the appliance ID you selected, the installation process may take from several minutes to few hours to complete.

  • Page 17: What's Next

    General Information Here are some excellent resources that will help take your JSA7800 knowledge to the next level: If you want to Then Download and manage your software licenses to unlock Juniper Customer Support additional features for your JSA Appliance...
  • Page 18 Juniper Portal Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

Table of Contents