Table of Contents
Advertisement
B Press the { { { { OK} } } } key.
F F F F
Set the original.
G G G G
Press the { { { { Resolution} } } } key to select
data resolution.
Note
❒ In order to set resolution to Ex-
tra Super Fine, you need to
make necessary settings with
user parameters. For informa-
tion about making this setting,
see p.166 "User Parameters"
(switch 20, bit 2).
H H H H
Specify the destination.
Specifying by the E-mail Address
A Press the user function key
({ { { { F1} } } } to { { { { F10} } } } ) assigned to the
Scanner (Scan to E-mail) func-
tion.
Note
❒ On Type 2 machines, the Scan-
ner (Scan to E-mail) function
is pre-assigned to the { { { { F10} } } }
key.
❒ You do not need to press the
user function key in the fol-
lowing cases:
• When the e-mail address
• When specifying the ad-
ZHMS190E
Reference
Chapter 2 "Dialing", Basic
Features
Chapter 3 "Redial", Advanced
Features
B Enter the e-mail address of the
destination.
Note
❒ You can enter up to 127 char-
acters for an e-mail address.
❒ You can enter "." and "@" us-
ing a Quick Dial key. Press
the { { { { Symbols} } } } key to enter
symbols. You can shift be-
tween upper and lower case
by pressing the { { { { ABC/abc} } } }
key.
❒ To enter texts registered in
"Template: Address", press
the { { { { #} } } } key, press the 0 or
1 key to display the desired
text, and then press the { { { { OK} } } }
ZHMS170E
key. See p.147 "Registering
Template Addresses".
Scanning a Color Original
is stored in either Quick
Dial key, Speed Dial, or
Group Dial.
dress using the Redial
function.
3
65
Advertisement
Table of Contents
