Table of Contents
Advertisement
B B B B
Set the original, and then make
the scan settings as necessary.
Note
❒ In order to set resolution to Ex-
tra Super Fine, you need to
make necessary settings with
user parameters. For informa-
tion about making this setting,
see p.166 "User Parameters"
(switch 20, bit 2).
C C C C
Enter the destination using a
Quick Dial key or Speed Dial.
Note
❒ You can specify the destination
using methods other than Quick
Dial or Speed Dial. See p.120
"Specifying Destinations With-
out Using Quick Dial Keys or
Speed Dials".
❒ If you want to specify another
destination, press the { { { { OK} } } } key
and repeat step
❒ You can perform fax transmis-
sion as well as Scanner Delivery
by entering a fax number as the
destination.
D D D D
Press the { { { { Start} } } } key.
Scanning begins.
When scanning is complete, the
standby display reappears, and the
scanned data is transmitted to the
server.
Note
❒ Press the { { { { Clear/Stop} } } } key to
cancel scanning. If scanning is
canceled, the scanned data is
cleared and will not be trans-
mitted.
C
.
Delivering Scanned Data
❒ Scanner Delivery stores the
scanned data in memory and
converts it into a file before
transmission. This procedure
may take a while depending on
the quantity of originals.
❒ The Communication Failure Re-
port is printed if transmission to
any of the specified destinations
was not successful.
7
119
Advertisement
Table of Contents
