Table of Contents
Advertisement
Message
Device cannot be opened
because there is no re-
sponse from the device.
- When Using Standard TCP/IP Port
-
-
-
When you use the LAN-Fax function on Windows 2000/XP, do not set "Stan-
dard TCP/IP Port" as the port for LAN-Fax Driver. Otherwise, the following
limitations apply:
• The transmission result and printing result dialog boxes will not appear.
• If NIC FAX cannot print (such as when it is turned off or the cover is opened),
and you save a file using the Saving function, the zero size file remains in the
spooler. After a while, "
document "file://xxxxx" to IP_xxxxx. Do you want to retry or
cancel the job?
This message appears when trying to display the Status List by
double-clicking the icon of SmartDeviceMonitor for Client on the
taskbar after installing and starting SmartDeviceMonitor for Cli-
ent. Follow the procedure below after starting up SmartDevice-
Monitor for Client to stop this message from appearing.
A
On the taskbar, right-click the icon of SmartDeviceMonitor for
Client, and then click [Options].
B
In "Printer List", click [LAN-Fax F3].
C
Click to clear the [To be Monitored] check box under "Monitoring
Information Settings".
D
Click [OK].
Reference
p.46 "Quick Install"
p.51 "SmartDeviceMonitor for Client"
There was an error found when printing the
" message appears.
Causes and solutions
Error Messages
10
165
Advertisement
Table of Contents
