Table of Contents
Advertisement
Troubleshooting
The following table shows user parameter switches related to e-mail commu-
nications.
Switch
02
04
06
10
10
20
170
Bit
Item
0
Forwarding mark printing
1
Center mark printing
2
Reception time printing
3
TSI printing
4
Checkered Mark printing
7
Attach images to File Reserve
Reports, Transmission Result
Reports, Communication Fail-
ure Reports, and Polling Trans-
mission Clear Reports
0
Fax Header printing
4
Batch transmission
1
Two In One
2
Image Rotation
2
Selection of "Extra Super Fine"
resolution for transmission
3
Selection of "Extra Super Fine"
resolution for reception
Description
This setting specifies whether or not
the forwarding mark should be ap-
pended to images of received e-mail
when they are being forwarded or
routed.
Printing e-mail address in the From
field of received e-mail
This setting specifies whether or not a
partial image of the transmitted docu-
ment should be attached to the Com-
munication Result Report at the time
of LAN-Fax transmission (if you set
the user code in Options).
See p.107 "Basic Transmission" and
p.176 "Communication Result Re-
port".
E-mail transmission does not support
batch transmission, but when you set
to "On", the same e-mail is sent to mul-
tiple destinations at the same time
(broadcasting). When you set to "Off",
e-mail is sent to individual destina-
tions one at a time (sequential broad-
casting).
See p.79 "When using NIC FAX with
Broadcasting and Sequential Broad-
casting".
Advertisement
Table of Contents
