Canceling Transmission of an IP-Fax
While the Original Is Being
Scanned In
To cancel IP-Fax transmission while
scanning is in progress, perform the
procedure described below.
A A A A
Press the { { { { Clear/Stop} } } } key.
The machine will stop storing the
original and the data will not be
sent.
After the Original Has Been
Scanned In
To cancel IP-Fax transmission after
scanning is complete, perform the
procedure described below.
Limitation
❒ You cannot cancel a transmission
that has already been performed. If
a file is not in the List of Files in
Memory, it has already been trans-
mitted. See Chapter 2 "Printing a
List of Files in Memory (Print TX
File List)", Advanced Features.
A A A A
Press the { { { { Job Information} } } } key.
B B B B
Confirm "1.Cancel TX / RX (Can-
cel Transmission / Reception)"
appears, and then press the { { { { OK} } } }
ZHMS070E
key.
If there are any files stored in
memory, the file information is
displayed.
C C C C
Press the 0 0 0 0 or 1 1 1 1 key until the file
you want to delete appears.
D D D D
Press the { { { { OK} } } } key.
E E E E
Press the 0 0 0 0 or 1 1 1 1 key to select
"Yes".
Note
❒ To cancel deletion, select "No".
F F F F
Press the { { { { OK} } } } key.
Canceling Transmission of an IP-Fax
ZHMS080E
5
105