Table of Contents
Advertisement
Access Control
Enter the access control setting.
When using the Web browser
monitoring function or LAN-Fax
function, access control deter-
mines the IP address(es) that can
connect to NIC FAX.
Consult your systems administra-
tor if you are unsure about this set-
ting. If you do not want to use this
f e a t u r e , l e a v e t h e s e t t i n g a s
"0.0.0.0".
A Enter the Access Control set-
ting using the number keys.
Note
❒ Press the 0 or 1 key to
move the display cursor.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
T h e dis play returns to the
TCP/IP settings menu.
Access Mask
Enter the access mask.
Enter a mask that specifies the
range of IP addresses that can be
connected based upon the access
control setting.
• Example:
Access control:
Access mask:
In this case, addresses in the
range 192.168.XXX.XXX can
connect.
192.168.15.16
255.255.0.0
NIC FAX Initial Settings
Consult your systems administra-
tor if you are unsure about this set-
t in g . I f yo u s et t h i s v a l u e to
"0.0.0.0", Access Control is not
available.
A Enter the access mask using the
number keys.
Note
❒ Press the 0 or 1 key to
move the display cursor.
❒ If you make a mistake, press
the { { { { Clear/Stop} } } } key to try
again.
B Press the { { { { OK} } } } key.
T he disp lay retu rns to th e
TCP/IP settings menu.
Network Boot
Set the Network Boot setting to
"DHCP" if you use the Network
Boot function with the DHCP serv-
er.
Consult your systems administra-
tor if you are unsure about this set-
ting.
Reference
p.32 "Network Boot"
A Press the 0 0 0 0 or 1 1 1 1 key to select
"Off" or "DHCP".
B Press the { { { { OK} } } } key.
T he disp lay retu rns to th e
TCP/IP settings menu.
2
37
Advertisement
Table of Contents
