Fcc Compliance - ETC ColorSource CYC v1.7 Installation Manual

ETC Installation Guide
ColorSource CYC v1.7/v3.1/v4.0
RDM Values
Parameter
Manufacturer ID
Model ID
DMX Start Address 0x00F0
DMX Personality
Output Frequency

FCC Compliance

ColorSource CYC
(For any FCC matters):
Electronic Theatre Controls, Inc.
3031 Pleasant View Road
Middleton, WI 53562
+1 (608) 831-4116
etcconnect.com
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation. Visit
nect.com/products
including FCC compliance.
Note:
the limits for a Class A digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. Any modifications or
changes to this product not expressly approved by Electronic
Theatre Controls, Inc. could void the user's authority to operate
the product. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be
required to correct the interference at their own expense.
ColorSource CYC
Value Description
0x6574 Electronic Theatre Controls
ColorSource CYC (v1.7), ColorSource CYC CPU2
0x0215
(v3.1), or ColorSource CYC CPU3 (v4.0)
Range = 1–512
1 = 5 Channel
2 = Direct
0x00E0
3 = 1 Channel
4 = RGB
0 = Standard (1.2 kHz)
0x8123
1 = High (25 kHz)
for current and complete compliance information
This equipment has been tested and found to comply with
Page 12 of 12
etccon-
ETC