Specifications And Reference; Typical Power Consumption - ETC ColorSource CYC v1.7 Installation Manual

ETC Installation Guide
ColorSource CYC v1.7/v3.1/v4.0

Specifications and Reference

For current and complete compliance and specifications, see the
ColorSource CYC datasheet at etcconnect.com.
Environment
The ColorSource CYC operates in ambient temperatures of 0°C–40°C.
The ColorSource CYC is for indoor use only.
• Maximum recommended ambient operating temperature:
Ta = 40°C (104°F)
• Maximum anticipated external surface temperature at 40°C
ambient: Tmax = 110°C (230°F)
• External temperatures after 5 minutes of full-brightness operation
at 25°C (77°F) ambient: 49°C (119°F)
• External Temperature (steady state achieved) at 25°C (77°F): 88°C
(190°F)
Electrical
• Operates between 100 V and 240 VAC at a frequency of 50/60 Hz.
• Maximum power consumption is 160 W.
• Up to 9 luminaires (15 A max) may be linked via power thru
connector (10 luminaires total per circuit) when used with an
R20 Relay Module or Unison Echo Relay Panel. Consult breaker trip
curves when used with other equipment. Requires power from a
non-dimmable source.
• Inrush:
‐ 120 V: 39 A (first half-cycle)
‐ 240 V: 74 A (first half-cycle)

Typical Power Consumption

Idle
Direct at Full
ColorSource CYC
100 V
Power Current
1.66 W 0.04 A
133.7 W 1.34 A
120 V
Power Current
1.38 W 0.04 A
132.6 W 1.11 A
Page 11 of 12
230 V
Power Current
1.18 W 0.05 A
130.4 W 0.59 A
ETC