Features And Options; Usage - Linak TECHLINE ELEVATE LC3 IC User Manual

Features and options

• 24 V DC Brushless motor
• 1,000 N load in push and pull
• Max� speed 100 mm/sec� (adjustable and independent of load)
• Stroke length from 400 mm to 1,100 mm in steps of 100 mm
• Protection class: IP4X
• Position accuracy: +/- 1�5 mm
• Profile colour: Anodised aluminium
• Top and bottom plate colour: Zinc grey bottom plate / aluminium grey top plate
• Built-in dimensions: Stroke/2 + 280 mm - minimum BID is 400/2 + 280 = 480 mm
• Noise level: 58 dB (A)
• Weight: 29 kg with 900 mm stroke
• Dynamic bending moment: Up to 1,400 Nm (allowed bending moment between cobot and column
while the column is running in or out
• Static bending moment: Up to 3,000 Nm (allowed bending moment between cobot and column while
the column is not moving
• Mounting directions: The column can be mounted vertically with a top plate upright or upside down
• IC interfaces:
- I/O
- Modbus TCP/IP

Usage

• Duty cycle: 20% at full load and 25°C ambient temperature (4 minutes use, 16 minutes not in
use)
• Current consumption: 20 A (Supply)
• Operation temperature: +5°C to + 40°C
• Storage temperature: -40°C to + 70°C
• Relative humidity: 20% to 80% - non-condensing
• Atmospheric pressure: 700 to 1060 hPa
• Meters above sea level: Max� 3000 meters
Approvals:
• EN 55016-2-3:2017+A1, EN 55016-2-1:2014
• EN 61000-4-2:2009, EN IEC 61000-4-3:2020, EN 61000-4-4:2012
• EN 61000-4-5:2014+A1, EN 61000-4-6:2014, EN 61000-4-8:2010
• EN IEC 63000:2018
• EN 61000-6-2:2019 – Part 6-2
• EN 61000-6-4:2019 – Part 6-4
• BS EN 55016-2-3:2017+A1, BS EN 55016-2-1:2014
• BS EN 61000-4-2:2009, BS EN IEC 61000-4-3:2020, BS EN 61000-4-4:2012
• BS EN 61000-4-5:2014+A1, BS EN 61000-4-6:2014, BS EN 61000-4-8:2010
• BS EN IEC 63000:2018
• BS EN 61000-6-2:2019 – Part 6-2
• BS EN 61000-6-4:2019 – Part 6-4
ELEVATE™ User Manual | 9