Technical Specifications; B10 Data - Linak TECHLINE ELEVATE LC3 IC User Manual

Motor temp. [°C]
Worm Gear temp. [°C]
Brake temp. [°C]
Run time [h]

Technical specifications

Observations
LC3 IC with 24 V motor
The columns only run until the temperature is stabilized, i.e. for 3 hours and do not run until
failure. In the case of 25°C ambient, 25% load and 45% duty cycle, is was run for 2 hour
Order number
because the motor temperature was already above 120°C, from a testing with 50% duty
cycle.
Conclusions
Load [%] ��������
Duty Cycle vs. Load vs. Ambient Temperature:
25
50
LC3xxxxxxxxxxxxxxxxxxxxx-000
100
Based on the duty cycle limits at 120°C, the load and duty cycle curves are plotted. The data
for the 40°C ambient curve is estimated.
0,60
0,50
0,40
0,30
0,20
0,10
0,00
0
Report done by: Pamir Hamid 01.02.2024

B10 data

The lifetime of the LC3 lifting columns was tested by subjecting three units to a lifetime test� These
were rated 24 V (BLDC) and had a 900 mm stroke length with a 20 mm spindle� The test involved
running the lifting columns at their max� rated load of 1,000 N with an off-centre load of 1,000 N
at 0�3 m from the centre� The test was conducted with a 20% duty cycle, and the columns were
operated until they reached the point of failure, which was characterized by an extreme hopping
action when retracting�
On the basis of this, the following data were collected:
Kilometres at 65% confidence: 414�527 km
Cycles at 65% confidence: 230,293 cycles
Push Self-
max. lock
(N) min.
= �������� [ °�������� ] �������� = �������� �������� [ °�������� ]
(N)
�������� �������� �������� �������� �������� ��������
Push
0,50 0,45
0,45 0,38
1,000 2,000
0,35 0,30
Max. Duty Cycle vs. Load vs. Ambient Temperature
10 20 30 40
Load [%]
116
88
47
3,5
Pitch
Regulated
(mm/
speed
spindle
(mm/s)
�������� = �������� �������� [ °�������� ]
rev.)
Load
�������� �������� ��������
0,30
0,25
20 100
0,20
50 60 70 80 90
Page 4 of 4
123
92
ELEVATE™ User Manual | 10
50
3
Standard Typical
amp.
stroke
lengths
(A)
(mm)
No Full
in steps
load load
Decreased from 40%
of 100 mm
Estimated based on 5[°C]
400-1,100 6 20
Rated in SBU
T_amb=25[°C]
T_amb=5[°C]
T_amb=40[°C]
100