Hcpu_Prot_Mgr Messages; Hlfm Messages - Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual

HCPU_PROT_MGR Messages

Error Message HARDWARE-3-STATS_ERROR: Statistics ID [dec] is invalid.
HCPU_PROT_MGR Messages
This section contains the CPU protection manager messages.
Error Message HCPU_PROT_MGR-4-PROGRAM_POLICER_FAIL: Could not program policer for
port.

HLFM Messages

This section contains messages from the local forwarding manager.
Error Message HLFM-3-MACFREE_ERROR: MAC address [enet], vlan [dec] is still
referenced; cannot free.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-30
This message means that the statistics ID used is out of range. The statistics supported
Explanation
by the port ASIC are identified by an ID. [dec] is the statistics ID.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that a hardware error could have occurred.
Explanation
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the "Error Message Traceback Reports" section on page
This message means that an attempt was made to free a MAC address before releasing
Explanation
all references to it. [enet] is the MAC address, and [dec] is the VLAN ID.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-3.
1-3.
1-3.
"Error
"Error
OL-9641-04