Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message IGMP_QUERIER-6-PIM_DISABLED: The IGMP querier is now operationally
enabled in VLAN [dec] because PIM is no longer enabled on the SVI.
Error Message IGMP_QUERIER-6-SNOOPING_ENABLED: The IGMP querier is now operationally
enabled in VLAN [dec] because IGMP snooping is no longer disabled.
MAC_LIMIT Messages
This section contains the MAC_LIMIT messages, which describe the entries in the MAC address table.
Error Message MAC_LIMIT-4-DROP: Vlan [dec] with Configured limit = [dec] has
currently [dec] Entries.
Error Message MAC_LIMIT-4-ENFORCE: Enforcing limit on Vlan [dec] with Configured
limit = [dec].
OL-9641-04
Explanation
This message means that Protocol-Independent Multicast (PIM) is disabled on the
switch virtual interface (SVI), and the IGMP querier function is now enabled. [dec] is the VLAN
number.
Recommended Action
No action is required.
Explanation
This message means that IGMP snooping was enabled. As a result, the IGMP querier
function is now enabled. [dec] is the VLAN number.
Recommended Action
No action is required.
This message means that the number of MAC address table entries for a VLAN is less
Explanation
than or equal to the maximum number allowed. The first [dec] is the VLAN ID, the second [dec] is
the maximum number of MAC address entries, and the third [dec] is the number of entries in the
MAC address table.
Recommended Action
Your system administrator configures an action.
Explanation
This message means that the number of MAC address entries for the VLAN exceeds the
maximum number allowed and that the configured action is to limit the number of entries to the
maximum allowed. The first [dec] is the VLAN ID, and the second [dec] is the maximum number
of MAC address entries.
Your system administrator configures an action.
Recommended Action
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
MAC_LIMIT Messages
2-35
Advertisement
Table of Contents
