Gbic_Security_Unique Messages; Hardware Messages - Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual

GBIC_SECURITY_UNIQUE Messages

GBIC_SECURITY_UNIQUE Messages
This section contains the Cisco GBIC module and SFP module security messages that identify whether
the module is unique.
The switch supports SFP modules and does not support GBIC modules. Although the error message text
Note
refers to GBIC interfaces and modules, the messages from the switch actually refer to the SFP module
interfaces and modules.
Error Message GBIC_SECURITY_UNIQUE-3-DUPLICATE_GBIC: GBIC interface [dec]/[dec] is
a duplicate of GBIC interface [dec]/[dec].
Error Message GBIC_SECURITY_UNIQUE-4-DUPLICATE_SN: GBIC interface [dec]/[dec] has
the same serial number as another GBIC interface.

HARDWARE Messages

This section contains hardware messages.
Error Message HARDWARE-2-FAN_ERROR: Fan [chars] Failure
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-28
This message means that the SFP module was identified as a Cisco SFP module, but its
Explanation
vendor ID and serial number match that of another interface on the system. The first [dec]/[dec] is
the interface of the duplicate SPF module, and the second [dec]/[dec] is the interface of the existing
module.
Cisco SFP modules are assigned unique serial numbers. Verify that the module
Recommended Action
was obtained from Cisco or from a supported vendor.
Explanation This message means that the SFP module was identified as a Cisco SFP module, but its
serial number matches that of another interface on the system. [dec]/[dec] is the interface in which
the duplicate module is installed.
Recommended Action Cisco SFP modules are assigned unique serial numbers. Verify that the module
was obtained from Cisco or from a supported vendor.
Explanation The switch fan is not working. [chars] is the fan name.
This is a hardware failure. The fan might recover automatically. If the fan
Recommended Action
failure persists, copy the message exactly as it appears on the console or in the system log. Research
and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for
similar reported problems.If you still require assistance, contact Cisco technical support and provide
the representative with the gathered information. For more information about the online tools and
about contacting Cisco, see the "Error Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-3.
OL-9641-04