Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual page 67

Chapter 2 Messages and Recovery Procedures
Error Message PM-4-NO_SUBBLOCK: No PM subblock found for [chars].
Explanation
[chars] is the interface name.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-PORT_BOUNCED: Port [chars] was bounced by [chars].
Explanation
the port manager restarted the port. A port can be restarted only when the port data structures are
not consistent in the active and standby supervisors. Active ports in the link-down state are returned
to the link-up state when the port is restarted (the re-activation event). The first [chars] is the port
number, and the second [chars] is the re-activation event.
Recommended Action
Error Message PM-4-PVLAN_TYPE_CFG_ERR: Failed to set VLAN [dec] to a [chars] VLAN.
Explanation
VLAN ID.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-TOO_MANY_APP: application '[chars]' exceeded registration limit.
Explanation
application.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error. If
you still require assistance, open a case with the TAC, or contact your Cisco technical support
representative, and provide the representative with the gathered information. For more information
about these online tools and about contacting Cisco, see the
section on page
OL-9641-04
This message means that the port manager failed to find the subblock for this interface.
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that during a switchover when the port was in the link-down state,
No action is required.
This message means that the platform failed to set a private VLAN type. [dec] is the
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the port manager detected an invalid request. [chars] is the
Copy the message exactly as it appears on the console or in the system log.
1-3.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
1-3.
1-3.
"Error Message Traceback Reports"
PM Messages
2-55