Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual page 25

Ethernet access switches
Table of Contents

Advertisement

Chapter 2
Messages and Recovery Procedures
Error Message DOT1X-5-ERR_CHANNELLING: Dot1x can not be enabled on Channelling
ports.
Explanation
set 802.1x port-control to auto or force-unauthorized (force_unauth) mode on a channeling port,
which is not allowed, caused this condition.
Recommended Action
Error Message DOT1X-5-ERR_DYNAMIC: Dot1x can not be enabled on Dynamic ports.
Explanation
to set 802.1x port-control to auto or force-unauthorized (force_unauth) mode on a dynamic mode
port, which is not allowed, caused this condition.
Recommended Action
Error Message DOT1X-5-ERR_DYNAMIC_VLAN: Dot1x can not be enabled on dynamic VLAN
ports.
Explanation
Trying to set 802.1x port-control to auto or force-unauthorized (force_unauth) mode on a dynamic
VLAN port, which is not allowed, caused this condition.
Recommended Action
802.1x.
Error Message DOT1X-5-ERR_INVALID_TUNNEL_MEDIUM_TYPE: Got an invalid value [chars]
for TUNNEL_MEDIUM_TYPE [chars].
Explanation
[chars] is the text received from the RADIUS server.
Recommended Action
Error Message DOT1X-5-ERR_INVALID_TUNNEL_TYPE: Got an invalid value of [chars] for
TUNNEL_TYPE [chars].
Explanation
[chars] is the text received from the RADIUS server.
Recommended Action
OL-9641-04
This message means that 802.1x could not be enabled on the channeling port. Trying to
Disable channeling on the interface, and then enable 802.1x.
This message means that 802.1x could not be enabled on the dynamic mode port. Trying
Disable dynamic mode on the interface, and then enable 802.1x.
This message means that 802.1x could not be enabled on the dynamic VLAN port.
Disable dynamic VLAN configuration on the interface, and then enable
This message means that the provided tunnel medium is either unsupported or invalid.
Change the value to a valid tunnel medium.
This message means that the provided tunnel type is either unsupported or invalid.
Change the value to a valid tunnel type.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
DOT1X Messages
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Me-2400-24ts-dMe 3400eMe 2400Me 3400 series

Table of Contents