Platform_Env Messages - Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual

PLATFORM_ENV Messages

PLATFORM_ENV Messages
This section contains platform-specific environmental messages.
Error Message PLATFORM_ENV-1-DUAL_PWR: Faulty internal power supply [chars]
detected.
Note
Error Message PLATFORM_ENV-1-EXTERNAL_ALARM_CONTACT_ASSERT: Alarm asserted: %s.
Note
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-40
This message means that there are too many VLANs and routed ports. [chars] is the
Explanation
short interface name, such as Gi0/1, or the VLAN name, such as VLAN0002.
Reduce the total number of VLANs and routed ports to less than 1023. To
Recommended Action
preserve configurations and connections across reboots, save the configuration.
This message applies only to the Cisco ME 3400E and ME 3400 switches.
A faulty internal power supply was detected in one of the two power supplies on the
Explanation
switch. [chars] is the power supply name.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message applies only to the Cisco ME 3400E switch.
Explanation An error condition was detected on an external alarm contact.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-3.
1-3.
"Error
"Error
OL-9641-04