Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message PLATFORM_ENV-1-EXTERNAL_ALARM_CONTACT_CLEAR: Alarm cleared: %s.
Note
Explanation
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message PLATFORM_ENV-1-FRU_PS_FAN_FAILED: Faulty PS%s fan detected.
Note
Explanation
Recommended Action
Error Message PLATFORM_ENV-1-FRU_PS_FAN_OK: PS%s fan ok.
Note
Explanation
Recommended Action
Error Message PLATFORM_ENV-1-FRU_PS_OIR: FRU Power Supply %s.
Note
Explanation
Recommended Action
OL-9641-04
This message applies only to the Cisco ME 3400E switch.
An error condition was cleared on external alarm contact.
Copy the message exactly as it appears on the console or in the system log.
This message applies only to the Cisco ME 3400E switch.
A power-supply fan failure was detected.
Replace the faulty fan.
This message applies only to the Cisco ME 3400E switch.
The power-supply fan module is working correctly.
No action is required.
This message applies only to the Cisco ME 3400E switch.
A power-supply moduel was inserted or removed.
No action is required.
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
1-3.
PLATFORM_ENV Messages
"Error
2-41
Advertisement
Table of Contents
