Cisco 1601 - Router - EN Hardware Installation Manual page 71

Serial Interface Cards
Cables for 8-Port and 16-Port Serial HWICs
The following cables are available from Cisco Systems for the 8-port and 16-port serial HWICs.
Cable for the 8-Port RS-232 Asynchronous/Synchronous HWIC
The 8-port RS-232 asynchronous/synchronous HWIC uses a quad cable, consisting of a 68-pin
connector on the interface card end and four DB25 connectors on the system end. (See
cable is available in either DCE or DTE format.
Figure 42 Quad Serial Cable
Serial High Speed WICs
Figure 42.) This
OL-12843-01
11