Cisco 1601 - Router - EN Hardware Installation Manual page 37

Hardware installation guide
Table of Contents

Advertisement

Installing Cisco Interface Cards in Cisco Access Routers
Warning
Before opening the chassis, disconnect the telephone-network cables to avoid contact with
telephone-network voltages. Statement 1041
The telecommunications lines must be disconnected 1) before unplugging the main power connector
Warning
and/or 2) while the housing is open. Statement 1043
Installing Cisco Interface Cards in Cisco Access Routers
This section describes installation tasks for Cisco interface cards used on Cisco access routers, and
contains the following subsections:
Preparing to Install Cisco Interface Cards
When installing an interface card in a Cisco access router, perform the following tasks:
Table 5
Interface Card Hardware Installation Tasks for Cisco Access Routers
For All Cisco Access Routers Except Cisco 2800 and
Cisco 3800 Series Routers
Step 1
Turn off power to the router.
Step 2
Remove the blank faceplate from the slot you plan to use.
(See the
"Removing Blank Faceplates" section on page
Step 3
Install the interface card. (See the
Interface Cards" section on page
Preparing to Install Cisco Interface Cards
Do not install an ISDN BRI WAN interface card or an ISDN BRI network module in the same
chassis as an ISDN PRI network module.
Preparing Cisco Router Slots for Interface Card Installation
Installing Blank Faceplates
Removing Blank Faceplates
Installing Interface Card Slot Dividers
Removing Interface Card Slot Dividers
Installing Single-Wide Interface Cards
Installing Double-Wide Interface Cards
"Installing Single-Wide
15.)
Installing Cisco Interface Cards in Cisco Access Routers
For Cisco 2800 Series and Cisco 3800 Series Routers
Turn off power to the router.
Remove the blank faceplate from the slot you plan to
8.)
use. (See the
"Removing Blank Faceplates" section
on page
8.)
Prepare the slot for the interface card form factor you
are installing. (See the
for Interface Card Installation" section on page
"Preparing Cisco Router Slots
6.)
OL-12842-01
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents