Download Print this page

Cisco 1811W - Integrated Services Router Wireless Quick Start Manual

Integrated services router cabling and installation.
Hide thumbs

Advertisement

Cisco 1811 and 1812 Integrated Services Router Cabling and
Installation
INCLUDES LICENSE AND WARRANTY INFORMATION
1
Cisco One-Year Limited Hardware Warranty Terms
2
Overview
3
Unpacking the Box
4
Connecting the Router
5
Connecting Antennas to the Router RP-TNC Connectors
6
Configuring the Router Using Cisco Router and Security Device Manager
7
Connecting a PC to the Router Console Port
8
Verifying Your Installation
9
Obtaining Documentation and Submitting a Service Request
Note: For localized versions of these instructions, please see the following URL:
http://www.cisco.com/en/US/partner/products/ps5853/prod_installation_guides_list.html
Quick Start Guide

Advertisement

   Also See for Cisco 1811W - Integrated Services Router Wireless

   Related Manuals for Cisco 1811W - Integrated Services Router Wireless

   Summary of Contents for Cisco 1811W - Integrated Services Router Wireless

  • Page 1

    Unpacking the Box Connecting the Router Connecting Antennas to the Router RP-TNC Connectors Configuring the Router Using Cisco Router and Security Device Manager Connecting a PC to the Router Console Port Verifying Your Installation Obtaining Documentation and Submitting a Service Request Note: For localized versions of these instructions, please see the following URL: http://www.cisco.com/en/US/partner/products/ps5853/prod_installation_guides_list.html...

  • Page 2: Cisco One-year Limited Hardware Warranty Terms

    Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location.

  • Page 3: Unpacking The Box

    Product Serial Number Location The serial number label for the Cisco 1811 and Cisco 1812 routers is located on the back of the chassis, above and to the right of the power switch. You need this serial number when calling Cisco for support. To see specifically where the serial label is on your router, go to the following link: http://tools.cisco.com/Support/CPI/index.do...

  • Page 4: Connecting The Router

    • Server or other computer with a network interface card (NIC) or other networked device (such as a hub or a switch) to connect to the integrated 8-port 10/100-Mbps Ethernet switch Connecting the Router Figure 2 shows a typical installation of a Cisco 1811 or Cisco 1812 router. Figure 2 Typical Installation of a Cisco 1811 or Cisco 1812 Router...

  • Page 5

    RJ-11 cable to the V.92 modem port (for the Cisco 1811) or a straight-through RJ45 cable to the ISDN S/T port (for the Cisco 1812) on the router, as shown in Figure 2, and connect the other end of the cable to your telephone wall jack.

  • Page 6: Connecting Antennas To The Router Rp-tnc Connectors

    Connecting a PC to the Router Console Port This step is optional; it is required only if you want to use the Cisco IOS CLI instead of SDM to configure or troubleshoot the router. To use Cisco IOS, you must connect the router to a terminal or to a PC with terminal emulation software. Terminal...

  • Page 7: Verifying Your Installation

    • No parity bits • 1 stop bit The Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide describes how to configure the router by using Cisco IOS software. Follow these steps to connect the router to a terminal or PC: Connect the RJ-45 end of the console cable to the CONSOLE port on the back panel of the router, as shown in Figure 4.

  • Page 8: Obtaining Documentation And Submitting A Service Request

    Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version...

  • Page 10

    Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar,...

This manual also for:

1811, 1812

Comments to this Manuals

Symbols: 0
Latest comments: