Table of Contents
Advertisement
4.8.3
RADIUS
In order to use external RADIUS server, the following parameters are required to
be setup:
Authentication Server IP: The IP address of the RADIUS server.
Authentication Server Port: The port number for the RADIUS server is
listening to.
Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
Confirm Authentication Key: Re-type the key entered above.
The VLAN of the RADIUS server connected to the switch must
be the same as the VLAN of the system management interface.
Note
Please click OK to make the settings permanent. Click Reload to refresh the
settings to current value.
GigaX2024B L2 Managed Switch User Manual
Figure 49. RADIUS
47
Advertisement
Table of Contents
