Speaker Installation/Connection (Advanced Connection); Install - Denon AVR-1612 Owner's Manual

Speaker installation/connection (Advanced connection)

Here we describe the installation, connection and
setup methods for speakers other than 5.1-channel
speakers. For the installation, connection and setup
methods for 5.1-channel speakers, see
"Setup wizard".
Use Audyssey ® Auto Setup function of this unit
to automatically detect the number of connected
speakers and perform optimal settings for the
speakers to be used.
Procedure for speaker settings

Install

Connect (vpage 36)
Set up speakers (vpage 40)
Install
C page 4
This unit is compatible with Dolby Pro Logic gz
which offers an even wider and deeper surround sensation.
When using Dolby Pro Logic gz, install front height speakers.
Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm)
higher than ear level.
Front height
speaker
• Point slightly
downwards
At least
z
3.3 ft / 1 m
Front
speaker
GViewed from the sideH
z Recommended for Dolby Pro Logic gz
NOTE
It is not possible to use the surround back speakers and front height
speakers simultaneously.
When 7.1ch (Surround back speaker) installed
(vpage 89),
Surround
speaker
2 – 3 ft /
60 – 90 cm
Surround back
speaker
• Point slightly
downwards
FL Front speaker (L)
FR Front speaker (R)
C
SW Subwoofer
SL Surround speaker (L)
SR Surround speaker (R)
34
FL FR
SW
C
z1
z2
z3
SL
Listening
position
SBL SBR
z1 22˚ – 30˚ z2 90˚ – 110˚ z3 135˚ – 150˚
GSpeaker abbreviationsH
SBL Surround back speaker (L)
SBR Surround back speaker (R)
Center speaker
vSee overleaf
SR