Specifications - Denon AVR-2312CI Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
6 – 16 Ω
Output connectors:
• Analog
200 mV/47 kΩ
Input sensitivity/Input impedance:
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance:
Frequency response:
• Color component video connector
Input/output level and impedance:
Frequency response:
n Tuner section
Receiving Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
S/N (IHF-A):
Total harmonic Distortion (at 1 kHz):
n General
Power supply:
Power consumption:
For purposes of improvement, specifications and design are subject to change without notice.
145
1 Vp-p, 75 Ω
5 Hz – 10 MHz — 0, –3 dB
Y (brightness) signal — 1 Vp-p, 75 Ω
P / C signal — 0.7 Vp-p, 75 Ω
B B
P / C signal — 0.7 Vp-p, 75 Ω
R R
5 Hz – 60 MHz — 0, –3 dB
[FM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 W)
87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz
1.2 μV (12.8 dBf) 18 μV
MONO 2.0 μV (17.3 dBf)
MONO 72 dB
STEREO 67 dB
MONO 0.3 %
STEREO 0.7 %
AC 120 V, 60 Hz
600 W
0.1 W (Standby)
2.2 W (CEC standby)
[AM]