Denon AVR-2312CI Owner's Manual page 75

REC OUT mode
When using the audio/video recording connectors (DVR outputs), you
can record the audio or video from a different program source while
listening to the currently played track.
1
Press ZONE2 / REC SELECT
until "RECOUT SOURCE" is
displayed.
The indicator illuminates.
ZONE2 SOURCE ZONE2 TUNER ····
RECOUT NET/USB RECOUT DOCK ····
2
Press ZONE2 / REC SELECT to choose the input
source to be recorded.
• For operating instructions, refer to the respective device's
operating instructions.
3
Start recording.
• For operating instructions, refer to the respective device's
operating instructions.
BD
ZONE2 / REC SELECT
• To cancel, press
displayed.
• Make a test recording before starting the actual recording.
• The digital signal input into the HDMI, COAXIAL, and OPTICAL
connectors is not output from the analog REC OUT connector.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
• ZONE/DEVICE power button
• Muting button
• Master volume control button
NOTE
ZONE2 NET/USB
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
RECOUT SOURCE
holder.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 113) cannot be selected.
Convenient functions
until "ZONE2 SOURCE" is
72