Denon AVR-2312CI Owner's Manual page 72

Integrated network av receiver
Hide thumbs Also See for AVR-2312CI:
Table of Contents

Advertisement

NOTE
• When "HDMI Control" – "Control" is set to "ON", it consumes
more standby power.
• The HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
• Some functions may not operate depending on the connected TV
or player. Check the owner's manual of each device for details
beforehand.
• When "Power Off Control" on the menu is set to "OFF"
(vpage 106), this unit is not set to standby even if the connected
device is in the standby mode.
• When connection changes are implemented, such as adding
connections to HDMI devices, linked operations may be initialized.
In this case, you will need to reconfigure the settings.
• When "HDMI Control" – "Control" is set to "ON", it is not
possible to assign an HDMI connector to "TV" at "Input Assign"
(vpage 88).
• Should any of the operations below be performed, the interlocking
function may be reset, in which case, repeat steps 2 and 3.
• "Input Assign" – "HDMI" (vpage 88) setting has changed.
• There is a change to the connection between the devices and the
HDMI, or an increase in devices.
BD
Sleep timer function
The power automatically goes into standby once the set time has
elapsed.
This is convenient for playing sources while going to sleep.
SLEEP
Press
and display the time you
want to set.
The
indicator on the display lights.
• The time switches as shown below each
SLEEP
time
is pressed.
OFF
10 min
20
30
120
110
100
90
80
SLEEP
• If
on the main unit is pressed, the same function as with the
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
SLEEP
Press
.
"Sleep : zmin" appears on the display.
z Countdown time
To cancel the sleep timer
SLEEP
Press
to set "OFF".
The
indicator on the display turns off.
• The sleep timer setting is canceled if this unit's power is set to
standby.
• The sleep timer function can be set separately for the different zones
(vpage 81
"Sleep timer function").
69
Convenient functions
40
50
70
60

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-2312

Table of Contents