Denon AVR-2312CI Owner's Manual page 117

Setting items
GUI Master Volume : Display the master volume during adjustment.
(Continued) • Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "iPod (USB)".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Tuner : Set the tuner screen display time when the input source is
"Tuner".
• Always : Show display continuously.
• 30s : Show display for 30 seconds after operation.
• 10s : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Setup Guide See "Registering preset codes" (vpage 119).
Search a preset code to
register in the remote
control unit.
Quick Select Name • Up to 16 characters can be input.
Change the "Quick Select" • For character input, see page 85.
display title to one you
prefer.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 85.
each zone to one you prefer.
BD
Setting details
114
Setting items
n When setting for zone (MAIN ZONE / ZONE2)
Trigger Out
Select the condition for
Trigger out is activated through linkage to the power of the zone set
activating Trigger Out for
to "ON".
the input source, surround
n When setting for input source
mode, etc.
Activate trigger out when the input source set to "ON" is selected.
See "TRIGGER OUT jacks"
(vpage 18) for more Active for the zone set to "ON" with "When setting for zone".
information on trigger out.
n When setting for surround mode
Activate trigger out when the surround mode set to "ON" is selected.
Active when the "MAIN ZONE" set to "ON" with "When setting
for zone" is selected, and when the input source set to "ON" with
"When setting for input source" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
• Menu operations
SYSTEM SETUP
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
OFF Dark
• Channel Level
vSee overleaf