Denon AVR-2312CI Owner's Manual page 92

Setting items
DIGITAL COAX (coaxial) 1, 2 / OPT (optical) 1, 2
Set this to change the digital None : Do not assign a digital input connector to the selected input source.
input connectors assigned
• At time of purchase, the settings of the different input sources are as
to the input sources.
shown below.
BD DVD TV
Input source
SAT/CBL DVR
Default
GAME1 GAME2 V.AUX
setting
DOCK CD
Input source
Default
setting
COMP COMP (Component video) 1, 2
(Component video) None : Do not assign a component video input connector to the selected
Set this to change the input source.
component video input
• At time of purchase, the settings of the different input sources are as
connectors assigned to the
shown below.
input sources.
Input source
BD DVD TV
SAT/CBL DVR Default
setting
GAME1 GAME2 V.AUX
DOCK
Input source
Default
setting
• An input source to which an component video input connector cannot be
assigned is displayed as "– – –".
• When a control dock for iPod is connected, signals cannot be assigned to
the component video connectors.
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
message "Return all settings to the default?"
is displayed. Select "Yes" or "No", and then
ENTER
press
BD
Setting details
BD DVD TV SAT/CBL
COAX OPT COAX
None
1 1 2
GAME1 GAME2 V.AUX DOCK
None None None None
BD DVD TV SAT/CBL
COMP COMP
None None
1 2
GAME1 GAME2 V.AUX DOCK
None None None None
ENTER
, the
.
Video
Set the source video.
z "BD", "TV", "GAME1" or "GAME2" can be set when "HDMI"
(vpage 89) has been assigned.
Setting items
DVR
Video Select SOURCE : Play the picture and sound of the input source.
OPT
Video of another input BD / DVD / TV / SAT/CBL / DVR / GAME1 / GAME2 / V.AUX / DOCK
2
source is played back : Select video input source to view. This can be set for individual input
combined with the playing sources.
CD
audio.
None
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video appropriate for game content.
DVR
Movie : Process video normally.
z z
BD DVD TV
None
SAT/CBL DVR
• If "Video Mode" is set to "Auto", the mode is switched according to the
z z
GAME1 GAME2
V.AUX DOCK
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
89
Default settings are underlined.
(vpage
Setting details
"BD", "TV", "GAME1" and "GAME2" can be selected only when a
component video is assigned as an input source.
NOTE
(vpage 113) cannot be selected.
input contents.
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
SOURCE SELECT
88) or "COMP"
vSee overleaf