Denon AVR-2312CI Owner's Manual page 105

Speaker Setup
Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup.
• If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to select
Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® (vpage 98).
• "SYSTEM SETUP" can be used without changing the settings. Please set if necessary.
Setting items
Amp Assign NORMAL : Select the "NORMAL" setting to perform 7.2-channel playback
The signal output from the using the surround back or front height speakers.
SURR.BACK/AMP ASSIGN ZONE2 : Select the "ZONE2" setting to assign the unit's built-in power
speaker terminal of this unit amplifier for ZONE2 and output the audio in stereo.
can be switched to match Bi-AMP : Select the "Bi-AMP" setting to connect the front speakers via
your speaker environment. the bi-amp connection.
2CH : When you perform 2-channel playback in the DIRECT or STEREO
mode, select the "2CH" setting to use the other front speakers for
playback.
Front B : Select the "Front B" setting to use the second set of front
speakers for playback. You can switch the front speakers A and B to be
used for playback in accordance with the 2-channel playback or multi-
channel playback mode. When you select this Front B setting, also
perform the "Front Speaker Setup" (vpage 105) procedure.
F.Height : Select the "F.Height" setting to use the front height speaker
for playback.
BD
Default settings are underlined.
Setting details
102
Setting items
Speaker Config. Front : Set the front speaker size.
Select speaker configuration • Large : Use a large speaker that can adequately play back low
and size (bass reproduction frequencies.
capability). • Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
NOTE
Do not use the outward
• When "Subwoofer" is set to "No", "Front" is automatically set to
shape of the speaker to
"Large".
determine selection of a
• When "Front" is set to "Small", "Center", "Surround", "Surr.Back" and
"Large" or "Small" speaker.
"Front Height" can not be set to "Large".
Instead, use the frequencies
Center : Set the presence and size of the center speaker.
set in "Crossover Freq."
• Large : Use a large speaker that can adequately play back low
(vpage 105) as the
frequencies.
standard for determining
• Small : Use a small speaker that has inadequate playback capacity for
bass reproduction capability.
low frequencies.
• None : Select when a center speaker is not connected.
"Large" is not displayed when "Front" is set to "Small".
Subwoofer : Set the presence of a subwoofer.
• Yes : Use a subwoofer.
• No : Select when a subwoofer is not connected.
When "Front" is set to "Small", "Subwoofer" is automatically set to
"Yes".
Surround : Set the presence and size of the surround speakers.
• Large : Use a large speaker that can adequately play back low
frequencies.
• Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• None : Select when the surround speakers are not connected.
• When "Surround" is set to "Large", "Surr.Back" and "Front Height"
can be set to "Large".
• When "Surround" is set to "None", "Surr.Back" and "Front Height" are
automatically set to "None".
SYSTEM SETUP
Setting details
vSee overleaf