Denon AVR-2312CI Owner's Manual page 78

Zone Management function
The status of devices connected to the same network can be
displayed. Additionally, network menu browsers and volume controls
can be performed via the network for the connected devices. This is
useful when playing back network services of a device located in a
separate room.
Only devices compatible with the Zone Management function can be
operated. With the Zone Management function, the network menu
screen and playback screen of the target device to be controlled are
displayed but playback with this unit is not possible. If you also want to
play the same music as the other device, use the Party Mode function.
1
Press ui to select "Network Setup" – "Other" –
"Zone Management" from the menu, and then press
ENTER or p .
OTHER
Character
PC Language
Friendly Name Edit
Party Mode Function
Zone Management
Update Notification
Check the status of other D&M products on
your network and browse the network menu
2
ui
Press to select the Friendly Name of the device,
ENTER p
and then press or .
ZONE MANAGEMENT
DENON:[AVR-2312CI]
DENON:[RCD-N7]
Return
RETURN
Check status and select device for content browsing.
• Displays up to a maximum of 10 DENON products connected on
the same network.
BD
3
Press ui to select "Device Control", and then press
ENTER
.
When the device control mode is started, the network menu
of the connected device is displayed on this unit's television
screen.
DENON:[AVR-2312CI]
Model AVR-2312CI
Power ON
Select Source NET/USB
Volume Level -20.0dB
Device Control
Enter
RETURN
Start device control
NOTE
• If the selected device is compatible with the Zone Management
function, "Device Control" mode starts.
• If the selected device is in Party Mode or being controlled with
Zone Management, "Device Control" is not displayed.
4
uio p ENTER
Press and to select the desired track.
[1/7]
DENON:[AVR-2312CI]
REMOTE CONTROL
Favorites
Internet Radio
Media Server
Flickr
Napster
Pandora
Rhapsody
Exit Vol.up
MENU CH+ CH-
• When in device control mode,
television screen of the controlling device, and
on the television screen of the device being controlled.
75
The zone management function can only be used on a combination
of DENON devices that are equipped with the zone management
function.
NOTE
• The volume of the selected device can be controlled using
(volume up) and
level is not displayed. Be careful not to increase the volume too high.
• For services that require an account, set the account settings on the
target device in advance. Also, some functions of the device may be
restricted in "Device Control" mode.
n To end "Device Control" mode
Return
1
MENU
Press
mode.
"Exit Device
displayed on the TV screen.
2
Press o p
ENTER
press
"Power off Remote component?" is
displayed on the TV screen.
3
Press o p
Yes
Turns off the target device and ends "Device Control"
mode.
No Ends "Device Control" mode without turning off the
power off the target device.
Vol.down
is displayed on the
"Device Control" mode can also be ended from the controlled device
is displayed
side.
MENU
q Press on the controlled device.
w When "Exit Device Control Mode?" is displayed on the TV
screen, select "Yes" and then press
Convenient functions
CH –
(volume down) of this unit, but the volume
in "Device Control"
Control mode?" is
to select "Yes", then
.
to select "Yes" or "No", then press ENTER
ENTER
.
CH +
.