Figure 37. Mac Access Control - D-Link DWS-3024 User Manual

D-Link Unified Access System User Manual
Table 7. Global RADIUS Server
Field
Secret
Accounting
NOTE: If you access the RADIUS and MAC Authentication configuration
On the AAA/RADIUS tab, you can also configure a global list containing the MAC addresses
of wireless clients to allow or deny access to APs. The list only applies to profiles that use
local MAC Authentication, which is an SSID setting. MAC Authentication is disabled by
default. For information about enabling MAC Authentication, see
Network"
If you select Allow as the default action, the wireless clients you add to the Allow MAC List
can connect to the AP, and all other wireless clients are denied. If you select Deny as the
default action, the wireless clients with the MAC addresses that you add to the Deny MAC list
cannot associate with the AP.
NOTE: The MAC list label updates depending on the default action you select.

Figure 37. MAC Access Control

To add a wireless client to the MAC Authentication list, enter the MAC address of the client in
the MAC Address field and click Add. You must click Submit to apply the changes.
86 © 2001- 2008 D-Link Corporation. All Rights Reserved.
Description
The RADIUS Secret is the shared secret key for the RADIUS server. Click the Edit
check box to enter a secret. The text you enter is displayed as "*" characters to
prevent others from seeing the RADIUS key as you type.
RADIUS Accounting allows you to track and measure the resources a particular user
has consumed such as system time and amount of data transmitted and received.
information from the AP Profile page, the Profile Name field also appears. To
rename the profile, delete the existing name and enter the new name in the
field, then click Submit.
on page 94.
Allows only MAC
addresses that
appear in the list
Denies only MAC
addresses that
appear in the list
"Configuring the Default