D-Link Unified Access System User Manual
7. Click Submit.
To access configuration information for SNMPv1 or SNMPv2, click LAN > Administration
> SNMP Manager and click the page that contains the information to configure.
Wireless System Features and Standards Support
In addition to core switching features, the D-Link Unified Switch supports the following
features and standards:
•
IP Tunneling
•
Spanning Tree
•
Auto detection and configuration of APs
•
Automatic Peer-Switch Discovery
•
Automatic or Manual RF Channel Assignment
•
Automatic or Manual AP Power Adjustment
•
AP Authentication
•
Client Authentication
•
Load Balancing
•
RF Scan and AP Sentry Mode
•
Dual Radio Support
•
Multiple Mode Support for Radios:
-
-
-
-
-
•
IEEE 802.11h (TPC and DFS)
•
Security Standard Support:
-
-
-
-
-
-
-
-
-
•
MAC Authentication
•
Multiple BSSID/VLANs
•
Security and Authentication Settings per SSID
•
VLAN Support
•
IEEE 802.11d (Country Code)
•
IEEE 802.11e (WMM)
•
RADIUS support
•
WLAN Visualization (NMS like product for APs)
•
Mobility
-
-
30
© 2001- 2008 D-Link Corporation. All Rights Reserved.
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
Dynamic Turbo 5Ghz
Dynamic Turbo 2.4 Ghz
WEP (64, 128)
WEP (152)
TKIP
AES & CCMP
Inhibit SSID broadcast
WPA (Personal)
WPA (Enterprise)
WPA2 (Personal) 802.11i
WPA2 (Enterprise) 802.11i
Inter- and Intra- Subnet Fast Roaming
Key caching