Figure 86. Interface Capability Status; Table 67. Interface And Capability Status - D-Link DWS-3024 User Manual

D-Link Unified Access System User Manual
Specifically, this page indicates what services are provided through the CP to clients
connected on this interface. The list of services is determined by the interface capabilities.

Figure 86. Interface Capability Status

The drop-down menu contains all the physical interfaces and wireless interfaces available on
the switch. Physical (wired) interfaces are identified by the Port Description that includes slot
number, port number, and interface type. Wireless interfaces are identified by the wireless
network number and SSID. Use the drop-down menu to select the interface with the
information to display.
Table 67

Table 67. Interface and Capability Status

Parameter
Session Timeout
Bytes Received
Counter
Bytes Transmitted
Counter
Roaming Support
Idle Timeout
Packets Received
Counter
Packets
Transmitted
Counter
182 © 2001- 2008 D-Link Corporation. All Rights Reserved.
describes the fields on the Interface Capability Status page.
Shows whether the interface supports client session timeout. This attribute is
supported on all interfaces.
Shows whether the interface supports displaying the number of bytes
received from each client.
Shows whether the interface supports displaying the number of bytes
transmitted to each client.
Shows whether the interface supports client roaming. Only wireless
interfaces support client roaming.
Shows whether the interface supports a timeout when the user doesn't send or
receive any traffic.
Shows whether the interface supports displaying the number of packets
received from each client.
Shows whether the interface supports displaying the number of packets
transmitted to each client.
Description