Associating Interfaces With The Captive Portal; Figure 82. Global Captive Portal Configuration; Table 63. Global Captive Portal Configuration - D-Link DWS-3024 User Manual

Associating Interfaces with the Captive Portal

From the Interface Association page, you can associate a configured captive portal with a
specific physical interface or wireless network (SSID). The CP feature only runs on the wired
or wireless interfaces that you specify. A CP can have multiple interfaces associated with it,
but an interface can be associated to only one CP at a time.
NOTE: When associating a physical interface with a captive portal configuration,
note the following restrictions:
• Captive portal and STP should not be enabled on the same physical interface.
• Captive portal and 802.1X cannot be enabled on the same physical interface.
• Port security and captive portal cannot be enabled on the same physical interface.
• If a physical interface is made a LAG member, the captive portal becomes
disabled on the interface.
To associate interfaces with CPs, click Security > Captive Portal > Interface Association.

Figure 82. Global Captive Portal Configuration

Table 63 describes the fields on the Interface Association page.

Table 63. Global Captive Portal Configuration

Field
CP Configuration
Associated
Interfaces
Interface List
Use the following steps to associate one or more interfaces with a captive portal.
1. Select the desired captive portal from the CP Configuration list.
Description
Lists the captive portals configured on the switch by number and name.
Lists the interfaces that are currently associated with the selected captive
portal. Wireless interfaces are identified by the wireless network number and
SSID. Physical (wired) interfaces are identified by the Port Description that
includes slot number, port number, and interface type.
Lists the interfaces available on the switch that are not currently associated
with a CP. Wireless interfaces are identified by the wireless network number
and SSID. Physical (wired) interfaces are identified by the Port Description
that includes slot number, port number, and interface type.
Associating Interfaces with the Captive Portal
9 Configuring the Captive Portal
177