D-Link DWS-3024 User Manual page 129

Table 26. Monitoring All Access Points
Field Description
Status Shows the access point status:
•
•
•
•
•
•
Profile The AP profile configuration currently applied to the managed AP. The
profile is assigned to the AP in the valid AP database.
NOTE: Once an AP is discovered and managed by the Unified Switch, if the
profile is changed in the valid AP database (either locally or on the RADIUS
server) the AP is automatically reset when a new profile is assigned.
Radio Shows the wireless radio mode that each radio on the AP is using. The
D-Link DWL-3500AP access point has one radio, and the D-Link
DWL-8500AP access point has two radios.
Channel Shows the operating channel for the radio.
Authenticated Shows the number of wireless clients that are associated and authenticated
Clients with the access point per radio.
NOTE: Some status values for some APs in the All Access Points list are not
available. Those are listed as N/A.
NOTE: You can sort the list of APs by any of the column heading except for Radio,
Channel, and Authenticated Clients. For example, to sort the APs by the
profile they use, click Profile.
Managed—The AP profile configuration has been applied to the AP and
it's operating in managed mode.
No Database Entry—The MAC address of the AP does not appear in the
local or RADIUS Valid AP database.
Authentication (Failed AP)—The AP failed to be authenticated by the
Unified Switch or RADIUS server.
Failed—The Unified Switch lost contact with the AP; a failed entry will
remain in the managed AP database unless you remove it. Note that a
managed AP will temporarily show a failed status during a reset.
Rogue—The AP has not attempted to contact the switch, and the MAC
address of the AP is not in the Valid AP database.
Acknowledged Rogue—The AP has been acknowledged as a known
rogue, and its MAC address of the AP is in the Valid AP database.
7 Monitoring Status and Statistics
Monitoring All Access Points 129