Table 64. Global Captive Portal Status
Field
CP Global
Operational Status
CP Global Disable
Reason
CP IP Address
Authenticated
Users
System Supported
Users
Configured
Captive Portals
Supported Captive
Portals
Active Captive
Portals
Viewing CP Activation and Activity Status
The CP Activation and Activity Status page provides information about each CP configured
on the switch.
Figure 84. CP Activation and Activity Status
The CP Activation and Activity Status page has a drop-down menu that contains all captive
portals configured on the switch. When you select a captive portal, the activation and activity
status for that portal displays.
Description
Shows whether the CP feature is enabled.
If CP is disabled, this field indicates the reason for the CP to be disabled,
which can be one of the following:
•
None
•
Administratively Disabled
•
No IPv4 Address
•
Routing Enabled, But no IPv4 routing interface
This field does not appear if the CP operational status is Enabled.
Shows the captive portal IP address
Shows the number of users currently authenticated to all captive portal
instances on this switch.
Shows the number of authenticated users that the system can support.
Shows the number of captive portals configured on the switch.
Shows the number of supported captive portals in the system.
Shows the number of captive portal instances that are operationally enabled.
9 Configuring the Captive Portal
Viewing the Captive Portal Global Status
179