Networks; Local Access Point Database - D-Link DWS-3024 User Manual

D-Link Unified Access System User Manual
profile to assign each AP that the switch manages. An existing profile and all of its
configurations may be copied to another profile or used to create a new profile. Each
configuration profile can have unique settings for the following access point features:
• RADIUS server settings
• MAC authentication list
• Radio interface and RF configuration
• QOS Configuration
• Virtual Access Point (VAP) Configuration
When you modify and apply a profile, the switch applies the changes to the APs it manages
that use the modified profile.
NOTE: The switch only applies the changes to the APs after you explicitly apply the
Until you apply the updated profile to the APs, the APs continue to operate with the original
AP profile settings. If you assign a new profile to the AP in the Valid AP database, you must
reset the AP.
All of the AP settings that you configure from the tabs on the Basic Setup page are for the
default AP profile. When you make changes to these settings, the settings affect all APs that
use the default profile.
All of the fields that you configure for the default profile are also available for profiles that
you create. For information about how to create a new profile and assign it to an AP, see
"Creating, Configuring, and Managing AP Profiles"

Networks

In general, a wireless client connects to an access point by choosing a network (identified by
the SSID) from a list of available wireless networks. You configure these wireless networks,
including their associated SSID, on the D-Link Unified Switch.
You manage the networks available on the WLAN by modifying or adding network
configurations, which include settings for the SSID, VLAN ID, security, and tunneling
parameters. You can associate a network with a Virtual APs (VAPs) within an AP
configuration profile.
By default, the switch has 8 networks, and each network is associated with one of the 8 VAPs
on each radio. You can modify (but not delete) the default network configurations and add new
network configurations. The first network is configured with a default SSID "Guest Network,"
and the other networks have default SSIDs assigned based on the Network ID. All the default
networks are configured with open authentication and assigned to the default VLAN 1. The
default VLAN is used if RADIUS-based authentication is not configured for the network or
the RADIUS server does not return a VLAN for a specific client.

Local Access Point Database

In order for a Unified Switch to manage an access point, you must add the physical MAC
address of the AP to the Valid AP database. The Valid AP database can reside locally on the
84 © 2001- 2008 D-Link Corporation. All Rights Reserved.
profile on the Advanced Configuration > AP Profile page or use the
command.
profile apply
on page 155.
ap