D-Link Unified Access System Default
Settings
This chapter identifies the default values for the D-Link Unified Switch, the default D-Link
Access Point settings, and the default AP Profile setting that the switch assigns to the AP after
it is discovered and authenticated (when the AP uses the default profile).
Default D-Link Unified Switch Settings
Table 76
Table 76. Switch Defaults
System Information
Network Information
shows the default settings for the D-Link Unified Switch.
Feature
User Name
Password
DHCP Client
Network Configuration Protocol
IP Address
Subnet Mask
802.1Q
Management VLAN ID
Untagged VLAN ID
Spanning Tree Protocol
Default
admin
None
Disabled
None
10.90.90.90
255.0.0.0
Enabled
1
1
Enabled
Default D-Link Unified Switch Settings
A
203