Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
Specifying Power ON Default Settings
The camera's "mode memory" feature is for customizing settings such as REC mode, flash mode, white
balance mode, ISO sensitivity, AF Area, metering mode, flash intensity, digital zoom mode and manual focus
position.
When ON is selected for a particular mode (in mode memory), the camera retains the status, regardless of
camera being turned ON/OFF. If OFF is selected for a mode (in mode memory), the camera restores the factory
setting for that mode.
1. In the REC mode, press [MENU].
2. Press [
] or [
] repeatedly to highlight and select the "Memory" tab.
3. Press [
] or [
] repeatedly to highlight and select the desired item to change settings, then press [
4. Press [
] or [
] to activate or de-activate the mode.
Resetting the Camera
Follow the steps below to reset all of the camera's settings to its factory settings as shown under the "Menu
Reference" on page 45.
1. In the REC mode or the PLAY mode, press [MENU].
2. Press [
] or [
] repeatedly to highlight and select the "Set Up" tab.
3. Press [
] or [
] repeatedly to highlight and select the 'Reset' tab, then press [
4. Press [
] or [
] to select 'Reset', then press [SET].
• To exit without resetting, press [
] or [
] to select "Cancel", then press [SET].
27
].
].
Advertisement
Table of Contents
Need help?
Do you have a question about the Eye-Q 5345z and is the answer not in the manual?
Questions and answers