Table of Contents
Advertisement
PREPARING THE CAMERA
Battery Level Indicator
The battery level indicator represents the level of power of the batteries. The meaning of each icon is as
follows:
Batteries are fully charged.
Battery power is not full, but sufficient for usage; should prepare a set of fresh batteries.
Battery power is running low, replace or recharge (rechargeable batteries only) batteries
immediately.
Batteries exhausted; replace them immediately with a set of fresh batteries or recharge
them if they are rechargeable.
Note: When
is displayed, the camera will not record images.
TURNING THE CAMERA ON & OFF
To turn ON the camera
Press either [ON/OFF] power button, [
By pressing [ON/OFF] or [
camera will be in the play (PLAY) mode. After pressing one of the above-mentioned buttons, the green
operation LED blinks, and the camera is ON.
To enter this mode at startup:
REC
PLAY
1
1. Green operation LED
2. [
] (PLAY)
3. [
] (REC)
4. [ON/OFF] (Power button)
] (REC) button, or [
], the camera enters the record (REC) mode, whereas if [
2
3
] (PLAY) button.
Press this button to turn on the camera:
Power button or [
] (REC) button
[
] (PLAY) button
4
9
] is pressed, the
Advertisement
Table of Contents
Need help?
Do you have a question about the Eye-Q 5345z and is the answer not in the manual?
Questions and answers