Exposure Compensation (Ev Shift); Adjusting White Balance - Concord Camera Eye-Q 5345z User Manual

EXPOSURE COMPENSATION (EV SHIFT)

Adjust the exposure compensation setting to compensate for certain light 'conditions' including: backlighting,
indirect indoor lighting, and dark backgrounds.
1. In the REC mode, press [MENU].
2. Press [ ] or [ ] repeatedly to highlight and select the
"REC" tab.
3. Press [ ] or [ ] repeatedly to highlight and select "EV
Shift", and then press [
4. Press [ ] or [ ] repeatedly to highlight and change the
exposure compensation value, and then press [SET].
• To cancel EV Shift, press [
adjust the value to 0.0.
• Performing an EV shift operation causes the metering
mode to switch automatically to center weighted
metering. Returning the EV shift value to 0.0 causes the
metering mode to change back to multi-pattern metering.
The settings can be adjusted in 1/3 steps in the range of
-2EV to +2EV.

ADJUSTING WHITE BALANCE

When the white balance mode is set to match the light source, the camera reproduces colors more accurately.
1. In the REC mode, press [MENU].
2. Press [ ] or [ ] repeatedly to highlight and select the
"REC" tab.
3. Press [ ] or [ ] repeatedly to highlight and select
"White Balance", and then press [
4. Press [ ] or [ ] repeatedly to highlight and set the
type of white balance mode, then press [SET].
Auto Auto
Daylight
Shade
Tungsten
Fluorescent
Manual Manual
].
] or [ ] repeatedly to
].
Settings are automatically set by the camera
For recording outdoors on a bright, sunny day
For recording under overcast, cloudy, shady or twilight skies
For recording under tungsten lighting
For recording under fluorescent lighting
Peculiar lighting environment that requires manual control balance
20
OTHER RECORDING FUNCTIONS